Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOPELEN B-111 - PP - Lotte Chemical Corporation

Material Data Center offers the following functions for HOPELEN B-111:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hopelen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 0.5 g/10min ISO 1133
ASTM数据
熔融指数, MFI 0.5 g/10min ASTM D 1238
机械性能价值单位Test Standard
ISO数据
屈服应力 35 MPa ISO 527
断裂伸长率 100 % ISO 527
弯曲模量, 23°C 1420 MPa ISO 178
悬臂梁缺口冲击强度, +23°C 39 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 20 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 -10 °C -
ASTM数据
屈服应力 37 MPa ASTM D 638
断裂伸长率 100 % ASTM D 638
弯曲模量 1760 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 49 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 25 J/m ASTM D 256
温度 -10 °C -
热性能价值单位Test Standard
ISO数据
热变形温度, 0.45 MPa 115 °C ISO 75-1/-2
ASTM数据
DTUL @ 66 psi 135 °C ASTM D 648
其它性能价值单位Test Standard
密度 900 kg/m³ ISO 1183
密度 900 kg/m³ ASTM D 792
典型数据
加工方法
片材挤出成型
特殊性能
经热稳处理的/耐热的, 透明.
特征
均聚物
Certifications
可食品接触的
应用
包装
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.