Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOSTAFORM® C 9021 SW XAP®2 LS - POM - Celanese

Material Data Center offers the following functions for HOSTAFORM® C 9021 SW XAP®2 LS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Hostaform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 函数
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 7 cm³/10min ISO 1133
温度 190 °C -
载荷 2.16 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 2700 MPa ISO 527
屈服应力 52 MPa ISO 527
屈服伸长率 7 % ISO 527
名义断裂伸长率 16 % ISO 527
无缺口简支梁冲击强度, +23°C 90 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 85 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 4 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 4 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 166 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 80 °C ISO 75-1/-2
线性热膨胀系数, 平行 120 E-6/K ISO 11359-1/-2
其它性能价值单位Test Standard
密度 1420 kg/m³ ISO 1183
函数
动态剪切模量－温度 , HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
应力－应变. , HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
正割模量－应变. , HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
应力－应变(等时的) 23°C, HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
蠕变模量－时间. 23°C, HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
蠕变曲线 23°C, HOSTAFORM® C 9021 SW XAP®2 LS, POM, Celanese
典型数据
加工方法
注塑, 其它挤出成型
供货形式
粒料
添加剂
润滑剂, 脱模助剂
特征
共聚物
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.