Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® F29 - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® F29:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ISO数据
拉伸模量 2860 MPa ISO 527
拉伸强度 52 MPa ISO 527
屈服伸长率 2.5 % ISO 527
断裂伸长率 8 % ISO 527
弯曲模量, 23°C 2900 MPa ISO 178
简支梁缺口冲击强度, +23°C 4.5 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 147 °C ISO 11357-1/-3
热变形温度, 0.45 MPa 60 °C ISO 75-1/-2
其它性能价值单位Test Standard
Biobased content 85 % -
Moisture Content 1 % -
加工推荐（注塑）价值单位Test Standard
预干燥-温度 50 °C -
注塑熔体温度 170 - 180 °C -
典型数据
加工方法
注塑
Certifications
生物相容, 生物降解, 可食品接触的, 10/2011认证, 可堆肥 ISO 13432 (制造商), 可堆肥 ISO 13432 (证书)
地区供应
欧洲, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.