Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KEPITAL® TE-23 - POM - Korea Engineering Plastics Co. Ltd.

Material Data Center offers the following functions for KEPITAL® TE-23:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kepital datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 8 g/10min ISO 1133
模塑收缩率, 平行 1.8 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸强度 45 MPa ISO 527
屈服伸长率 12 % ISO 527
断裂伸长率 >50 % ISO 527
弯曲模量, 23°C 1650 MPa ISO 178
简支梁缺口冲击强度, +23°C 13 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 165 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 76 °C ISO 75-1/-2
线性热膨胀系数, 平行 130 E-6/K ISO 11359-1/-2
厚度为h时的燃烧性 HB class IEC 60695-11-10
电性能价值单位Test Standard
ISO数据
表面电阻率 >1E15 Ohm IEC 62631-3-2
其它性能价值单位Test Standard
吸湿性 0.24 % 类似ISO 62
密度 1360 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 80 - 100 °C -
预干燥-时间 3 - 4 h -
加工湿度 ≤0.1 % -
模具温度 60 - 80 °C -
加料温度 60 - 80 °C -
1区 170 - 180 °C -
2区 180 - 190 °C -
3区 190 - 200 °C -
喷嘴温度 180 - 210 °C -
背压 2 MPa -
典型数据
加工方法
注塑
特殊性能
高冲击韧性的/经抗冲改性的
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.