Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEONA™ TR382 - PA66 - Asahi Kasei

Material Data Center offers the following functions for LEONA™ TR382:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Leona datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 1900 / 700 MPa ISO 527
屈服应力 * / 35 MPa ISO 527
屈服伸长率 * / 28 % ISO 527
50％伸长率时的应力S 45 / * MPa ISO 527
断裂伸长率 >50 / * % ISO 527
弯曲模量, 23°C 2000 / 700 MPa ISO 178
弯曲强度 73 / 30 MPa ISO 178
无缺口简支梁冲击强度, +23°C N / N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 80 / N kJ/m² ISO 179/1eA
洛克硬度 R 107 - ISO 2039-2
ASTM数据
拉伸强度 54 / 37 MPa ASTM D 638
断裂伸长率 70 / 220 % ASTM D 638
弯曲模量 2000 / 1000 MPa ASTM D 790
弯曲强度 79 / 39 MPa ASTM D 790
洛克硬度 R 107 / R 89 - ASTM D 785
Taber耐磨损性 6 mg/1000 cycles ASTM D 1044
悬臂梁缺口冲击强度, 1/8 in 1110 / 1320 J/m ASTM D 256
热性能干 / 已调节单位Test Standard
ISO数据
热变形温度, 1.80 MPa 58 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 183 / * °C ISO 75-1/-2
ASTM数据
热释放速率, 平行 110 E-6/K ASTM D 696
DTUL @ 66 psi 215 °C ASTM D 648
DTUL @ 264 psi 73 °C ASTM D 648
其它性能干 / 已调节单位Test Standard
吸湿性 1.7 / * % 类似ISO 62
密度 1080 / - kg/m³ ISO 1183
密度 1080 kg/m³ ASTM D 792
典型数据
加工方法
注塑, 电线挤出
供货形式
粒料
特殊性能
高冲击韧性的/经抗冲改性的, 经热稳处理的/耐热的
应用
汽车
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.