Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Luran® ECO 358N BC70 - SAN - INEOS Styrolution
Material Data Center offers the following functions for Luran® ECO 358N BC70:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces
Check here, which other Luran datasheets, application examples or technical articles are available in Material Data Center
Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our
disclaimer.
材料文字说明
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 93 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 70 %
| 加工/物理特性 | 价值 | 单位 | Test Standard |
| ISO数据 |
| 熔体体积流动速度, MVR |
22 |
cm³/10min |
ISO 1133 |
| 温度 |
220 |
°C |
- |
| 载荷 |
10 |
kg |
- |
| 模塑收缩率, 平行 |
0.5 |
% |
ISO 294-4, 2577 |
| 机械性能 | 价值 | 单位 | Test Standard |
| ISO数据 |
| 拉伸模量 |
3700 |
MPa |
ISO 527 |
| 屈服应力 |
72 |
MPa |
ISO 527 |
| 断裂伸长率 |
3 |
% |
ISO 527 |
| 弯曲模量, 23°C |
3600 |
MPa |
ISO 178 |
| 弯曲强度 |
120 |
MPa |
ISO 178 |
| 简支梁冲击强度, +23°C |
16 |
kJ/m² |
ISO 179/1eU |
| 简支梁冲击强度, -30°C |
16 |
kJ/m² |
ISO 179/1eU |
| 简支梁缺口冲击强度, +23°C |
2 |
kJ/m² |
ISO 179/1eA |
| 悬臂梁缺口冲击强度, +23°C |
2 |
kJ/m² |
ISO 180/1A |
| 球压硬度 |
165 |
MPa |
ISO 2039-1 |
| 热性能 | 价值 | 单位 | Test Standard |
| ISO数据 |
| 热变形温度, 1.80 MPa |
86[ann.] |
°C |
ISO 75-1/-2 |
| 热变形温度, 0.45 MPa |
99[ann.] |
°C |
ISO 75-1/-2 |
| 维卡软化温度, B |
106 |
°C |
ISO 306 |
| 线性热膨胀系数, 平行 |
70 |
E-6/K |
ISO 11359-1/-2 |
| Other Standards[S] |
| 热导率, 固态 |
0.17 |
W/(m K) |
DIN 52612-1 |
| S: | These properties are reported by the producer according standards that are different to our defaults. | ann.: | annealed |
| 电性能 | 价值 | 单位 | Test Standard |
| ISO数据 |
| 相对介电常数, 100Hz |
3 |
- |
IEC 62631-2-1 |
| 介质损耗因子, 100Hz |
40 |
E-4 |
IEC 62631-2-1 |
| 介质损耗因子, 1MHz |
70 |
E-4 |
IEC 62631-2-1 |
| 体积电阻率 |
1E14 |
Ohm*m |
IEC 62631-3-1 |
| 表面电阻率 |
>1E15 |
Ohm |
IEC 62631-3-2 |
| 光学特性 | 价值 | 单位 | Test Standard |
| Other Standards[S] |
| 折射率 |
1.57 |
- |
ISO 489 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 其它性能 | 价值 | 单位 | Test Standard |
| 吸湿性 |
0.2 |
% |
类似ISO 62 |
| 密度 |
1080 |
kg/m³ |
ISO 1183 |
| Bulk density |
600 |
kg/m³ |
- |
| 加工推荐（注塑） | 价值 | 单位 | Test Standard |
| 预干燥-温度 |
80 |
°C |
- |
| 预干燥-时间 |
2 - 4 |
h |
- |
| 注塑熔体温度 |
220 - 260 |
°C |
- |
| 模具温度 |
40 - 80 |
°C |
- |
| 注射速度 |
200 |
mm/s |
- |
典型数据
加工方法
注塑
供货形式
粒料
特殊性能
经热稳处理的/耐热的, 透明.
耐化学试剂
通用耐化学性
Certifications
生物相容, 可食品接触的, ISCC Plus
应用
通用, 包装
地区供应
北美, 欧洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
