Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® S 777ME - ASA - INEOS Styrolution

Material Data Center offers the following functions for Luran® S 777ME:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Luran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 其它性能 - 机械性能(薄膜)
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ASTM数据
屈服应力 46.2 MPa ASTM D 638
断裂伸长率 27 % ASTM D 638
弯曲模量 2158 MPa ASTM D 790
弯曲强度 68.9 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 128 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 16 J/m ASTM D 256
温度 -40 °C -
热性能价值单位Test Standard
ISO数据
维卡软化温度, A 97.8 °C ISO 306
ASTM数据
DTUL @ 66 psi 97.8 °C ASTM D 648
DTUL @ 264 psi 88.9 °C ASTM D 648
其它性能价值单位Test Standard
密度 1070 kg/m³ ASTM D 792
机械性能(薄膜)价值单位Test Standard
ASTM Data
拉伸模量, 平行 2160 MPa ASTM D 882
典型数据
加工方法
异型材挤出成型, 片材挤出成型, 其它挤出成型, 热成型
供货形式
粒料
地区供应
北美, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.