Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® S KR2863C - (ASA+PC) - INEOS Styrolution

Check here, which other Luran datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 试样制备条件 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Grade with very high heat resistance for automotive interiors and exteriors as well as electrical parts. Available in Europe only.

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	18	cm³/10min	ISO 1133
温度	260	°C	-
载荷	5	kg	-
模塑收缩率, 平行	0.5	%	ISO 294-4, 2577
模塑收缩率, 垂直	0.9	%	ISO 294-4, 2577
喷射温度	100	°C	-

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2500	MPa	ISO 527
屈服应力	62	MPa	ISO 527
屈服伸长率	4.9	%	ISO 527
名义断裂伸长率	>50	%	ISO 527
无缺口简支梁冲击强度, +23°C	N	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	60	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	17	kJ/m²	ISO 179/1eA

热性能	价值	单位	Test Standard
ISO数据
热变形温度, 1.80 MPa	109	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	130	°C	ISO 75-1/-2
维卡软化温度, B	130	°C	ISO 306
线性热膨胀系数, 平行	80	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	1.6	mm	-
Yellow Card 现存	是的	-	-
厚度为h时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	0.8	mm	-
Yellow Card 现存	是的	-	-
燃烧性－氧指数	21	%	ISO 4589-1/-2

电性能	价值	单位	Test Standard
ISO数据
相对介电常数., 100Hz	3.1	-	IEC 62631-2-1
相对介电常数., 1MHz	3	-	IEC 62631-2-1
介质损耗因子, 100Hz	60	E-4	IEC 62631-2-1
介质损耗因子, 1MHz	100	E-4	IEC 62631-2-1
体积电阻率	1E13	Ohm*m	IEC 62631-3-1
表面电阻率	1E14	Ohm	IEC 62631-3-2
介电强度	38	kV/mm	IEC 60243-1
相对漏电起痕指数	225	-	IEC 60112

其它性能	价值	单位	Test Standard
吸水性	0.6	%	类似ISO 62
吸湿性	0.16	%	类似ISO 62
密度	1160	kg/m³	ISO 1183

试样制备条件	价值	单位	Test Standard
ISO数据
注塑, 熔体温度	280	°C	ISO 294
注塑, 模具温度	80	°C	ISO 294
注塑, 注射速度	200	mm/s	ISO 294

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	100 - 110	°C	-
预干燥-时间	2 - 4	h	-
注塑熔体温度	260 - 300	°C	-
模具温度	60 - 90	°C	-

函数

典型数据

加工方法

注塑, 异型材挤出成型, 片材挤出成型, 吹塑, 热成型

供货形式

粒料

添加剂

脱模助剂

特殊性能

经光稳处理的/耐光的, 经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的

地区供应

欧洲

其他信息

注塑成型

PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 100 - 110 °C
Pre/Post-processing, Pre-drying, Time: 2 - 4 h

PROCESSING
injection molding, Melt temperature, range: 260 - 300 °C
injection molding, Melt temperature, recommended: 280 °C
injection molding, Mold temperature, range: 60 - 90 °C
injection molding, Mold temperature, recommended: 80 °C

E尾募烦龀尚

PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 100 - 110 °C
Pre/Post-processing, Pre-drying, Time: 2 - 4 h

PROCESSING
Extrusion, Profiles, Melt temperature: 200 - 240 °C

板材挤出成型

PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 100 - 110 °C
Pre/Post-processing, Pre-drying, Time: 2 - 4 h

PROCESSING
Extrusion, Plates, Melt temperature: 250 - 280 °C

耐化学性

酸类
	醋酸 (5g/100g) (23°C)
	柠檬酸溶液 (10g/100g) (23°C)
	乳酸 (10g/100g) (23°C)
	盐酸 (36g/100g) (23°C)
	硝酸 (40g/100g) (23°C)
	硫酸 (38g/100g) (23°C)
	硫酸 (5g/100g) (23°C)
	铬酸溶液 (40g/100g) (23°C)
碱类
	氢氧化钠溶液 (35g/100g) (23°C)
	氢氧化钠溶液 (1g/100g) (23°C)
	氨水(氢氧化铵) (10g/100g) (23°C)
醇类
	异丙醇 (23°C)
	甲醇 (23°C)
	乙醇 (23°C)
碳氢化合物
	正乙烷 (23°C)
	甲苯 (23°C)
	异辛烷 (23°C)
酮类
	丙酮 (23°C)
醚类
	(二)乙醚 (23°C)
矿物油
	SAE 10W40号多效润滑油 (23°C)
标准燃油
	不含酒精的标准燃油(优先使用C类ISO 1817 燃油) (23°C)
	含酒精的标准燃油(优先使用4号ISO 1817 燃油) (23°C)
	柴油(优先使用F类ISO 1817液体) (23°C)
盐溶液
	氯化钠溶液(10g/100g) (23°C)
	次氯化钠溶液 (10g/100g) (23°C)
	碳酸钠溶液 (20g/100g) (23°C)
	碳酸钠溶液 (2g/100g) (23°C)
	氯化锌溶液 (50g/100g) (23°C)
其它
	乙酸乙酯 (23°C)
	水 (23°C)
	去离子水 (90°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.