Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MAGNUM™ 1250 BG - ABS - Trinseo

Material Data Center offers the following functions for MAGNUM™ 1250 BG:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Magnum datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 1.7 g/10min ISO 1133
温度 220 °C -
负载 10 kg -
ASTM数据
熔融指数, MFI 1.7 g/10min ASTM D 1238
温度 230 °C -
负载 3.8 kg -
机械性能价值单位Test Standard
ISO数据
屈服应力 33.7 MPa ISO 527
弯曲模量, 23°C 1810 MPa ISO 178
悬臂梁缺口冲击强度, +23°C 26 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 17 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 -30 °C -
ASTM数据
屈服应力 33.6 MPa ASTM D 638
断裂伸长率 60 % ASTM D 638
弯曲模量 2013 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 358 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 187 J/m ASTM D 256
温度 -28.9 °C -
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 85 °C ISO 75-1/-2
热变形温度, 0.45 MPa 101 °C ISO 75-1/-2
ASTM数据
DTUL @ 66 psi 103 °C ASTM D 648
DTUL @ 264 psi 86.7 °C ASTM D 648
其它性能价值单位Test Standard
密度 1050 kg/m³ ASTM D 792
典型数据
加工方法
吹塑
特殊性能
高冲击韧性的/经抗冲改性的, 经热稳处理的/耐热的
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.