Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MALECCA K-700 - ABS - Denka Company Limited

Material Data Center offers the following functions for MALECCA K-700:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Malecca datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 6 g/10min ISO 1133
温度 265 °C -
负载 10 kg -
模塑收缩率, 平行 0.9 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 2000 MPa ISO 527
屈服应力 37 MPa ISO 527
断裂应力 37 MPa ISO 527
弯曲模量, 23°C 1900 MPa ISO 178
弯曲强度 65 MPa ISO 178
简支梁缺口冲击强度, +23°C 7 kJ/m² ISO 179/1eA
洛克硬度 R 112 - ISO 2039-2
ASTM数据
弯曲模量 1850 MPa ASTM D 790
弯曲强度 63 MPa ASTM D 790
洛克硬度 R 120 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 69 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 126 °C ISO 75-1/-2
维卡软化温度, B 150 °C ISO 306
ASTM数据
DTUL @ 264 psi 138 °C ASTM D 648
维卡温度 151 °C ASTM D 1525
其它性能价值单位Test Standard
密度 1090 kg/m³ ISO 1183
密度 1090 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 100 - 110 °C -
预干燥-时间 3 - 4 h -
模具温度 50 - 80 °C -
1区 220 - 240 °C -
2区 230 - 260 °C -
3区 240 - 270 °C -
喷嘴温度 240 - 265 °C -
螺杆转速 50 - 80 rpm -
背压 0.5 - 1 MPa -
典型数据
加工方法
注塑
特殊性能
经热稳处理的/耐热的
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.