Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Meplen EH HTP40 - PP-T40 - Mepol S.r.l.

Material Data Center offers the following functions for Meplen EH HTP40:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Meplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 10 g/10min ISO 1133
温度 230 °C -
负载 2.16 kg -
模塑收缩率, 平行 0.8 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
屈服应力 37 MPa ISO 527
断裂伸长率 15 % ISO 527
弯曲模量, 23°C 6000 MPa ISO 178
悬臂梁缺口冲击强度, +23°C 2.7 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 2 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 0 °C -
肖氏硬度D 76 - ISO 7619-1
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 165 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 90 °C ISO 75-1/-2
维卡软化温度, B 113 °C ISO 306
其它性能价值单位Test Standard
密度 1240 kg/m³ ISO 1183
典型数据
特殊性能
防静电的, 经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的
特征
均聚物
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.