Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® Rnew® 1100 - TPA - ARKEMA

Material Data Center offers the following functions for Pebax® Rnew® 1100:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Pebax® Rnew 1100 resin offers an excellent combination of high impact resistance, stiffness and lightness. In addition to high energy return, the main future of Pebax® materials, this grade will bring high performance to a wide range of sport applications: winter sports, team sports…


Pebax® Rnew  1100 resin is produced from a renewable source.



Main applications:
  • Consumer goods
  • Sports equipment

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags).

Shelf life:
Two years from the date of delivery.  For any use above this limit, please refer to our technical services.
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 - / 1100 MPa ISO 527
屈服应力 - / 39 MPa ISO 527
屈服伸长率 - / 5 % ISO 527
名义断裂伸长率 - / >50 % ISO 527
简支梁缺口冲击强度, +23°C - / 80 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C - / 30 kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 187 / * °C ISO 11357-1/-3
其它性能干 / 已调节单位Test Standard
密度 999 / - kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 70 - 80 °C -
预干燥-时间 4 - 6 h -
注塑熔体温度 240 - 280 °C -
模具温度 35 - 40 °C -
典型数据
加工方法
注塑
供货形式
粒料
特殊性能
高冲击韧性的/经抗冲改性的
Certifications
生物相容
应用
运动器械
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
其他信息
注塑成型

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 240°C / 260°C / 280°C.
- Typical mold temperature (mirror polish to get the optimum transparency) : 35-40°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 70-80°C.

Shilf life:
Two years from date of delivery.
For any use above this limit, please refer to our tehnical services.

权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.