Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Plexiglas® V825-68177  - PMMA - Altuglas International

Material Data Center offers the following functions for Plexiglas® V825-68177 :
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Plexiglas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 2.1 g/10min ISO 1133
温度 230 °C -
负载 3.8 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 3100 MPa ISO 527
断裂应力 65 MPa ISO 527
断裂伸长率 4 % ISO 527
弯曲模量, 23°C 3300 MPa ISO 178
悬臂梁缺口冲击强度, +23°C 1.8 kJ/m² ISO 180/1A
洛克硬度 M 90 - ISO 2039-2
热性能价值单位Test Standard
ISO数据
维卡软化温度, A 112 °C ISO 306
维卡软化温度, B 104 °C ISO 306
光学特性价值单位Test Standard
ASTM数据
光透射率 86 % ASTM D 1003
其它性能价值单位Test Standard
吸水性 0.3 % 类似ISO 62
密度 1190 kg/m³ ISO 1183
典型数据
地区供应
北美, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.