Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Premium PLA - PLA - Formfutura BV
Material Data Center offers the following functions for Premium PLA:
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Premium datasheets, application examples or technical articles are available in Material Data Center
Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our
disclaimer.
| 加工/物理特性 | 价值 | 单位 | Test Standard |
| Other Standards[S] |
| 熔融指数, MFI |
6 |
g/10min |
|
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 机械性能 | 价值 | 单位 | Test Standard |
| Other Standards[S] |
| 弯曲模量 |
2364 |
MPa |
|
| 弯曲强度 |
54.4 |
MPa |
|
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 热性能 | 价值 | 单位 | Test Standard |
| ASTM数据 |
| 熔点 |
210 |
°C |
ASTM D 3418 |
| 光学特性 | 价值 | 单位 | Test Standard |
| ASTM数据 |
| 光泽度 |
80[1] |
- |
ASTM D 2457 |
| 雾度 |
2.1 |
% |
ASTM D 1003 |
| 其它性能 | 价值 | 单位 | Test Standard |
| 密度 |
1240 |
kg/m³ |
ASTM D 792 |
| 机械性能(薄膜) | 价值 | 单位 | Test Standard |
| ASTM Data |
| 拉伸模量, 平行 |
3140 |
MPa |
ASTM D 882 |
| 拉伸强度, 平行 |
105 |
MPa |
ASTM D 882 |
| 断裂伸长率, 平行 |
175 |
% |
ASTM D 882 |
典型数据
加工方法
Additive Manufacturing
供货形式
单纤纺丝
特征
热稳定性
Certifications
生物相容
应用
通用
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
