Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsamid® AZM 30 O TLD - PA12-GF30 - ARKEMA

Check here, which other Rilsamid datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

ISO 16396 - PA12 , GF30, M1GHLR, C16-070

Rilsamid® AZM 30 O TLD resin is a fiberglass reinforced polyamide. This natural grade is designed for injection moulding.

This grade is also available in green (Rilsamid® AZM 30 Green 56827 TLD resin) and grey (Rilsamid® AZM 30 Grey 632 TLD resin).

Packaging: 

This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed

Shelf life: 

Two years from the delivery.

For any use above this limit please refer to our technical services. 

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	12 / *	cm³/10min	ISO 1133
温度	235 / *	°C	-
载荷	5 / *	kg	-

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	6900 / 6500	MPa	ISO 527
断裂应力	122 / 110	MPa	ISO 527
断裂伸长率	5 / 6	%	ISO 527
无缺口简支梁冲击强度, +23°C	85 / 88	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	96 / 93	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	23 / 22	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	15 / 16	kJ/m²	ISO 179/1eA

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	179 / *	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	160 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	175 / *	°C	ISO 75-1/-2
维卡软化温度, B	165 / *	°C	ISO 306
线性热膨胀系数, 平行	50 / *	E-6/K	ISO 11359-1/-2

电性能	干 / 已调节	单位	Test Standard
ISO数据
相对介电常数., 100Hz	4 / -	-	IEC 62631-2-1
相对介电常数., 1MHz	4 / -	-	IEC 62631-2-1
介质损耗因子, 100Hz	752 / -	E-4	IEC 62631-2-1
介质损耗因子, 1MHz	251 / -	E-4	IEC 62631-2-1
体积电阻率	- / 1E11	Ohm*m	IEC 62631-3-1
表面电阻率	* / 1E14	Ohm	IEC 62631-3-2
介电强度	- / 45	kV/mm	IEC 60243-1
相对漏电起痕指数	* / 600	-	IEC 60112

其它性能	干 / 已调节	单位	Test Standard
吸水性	1.2 / *	%	类似ISO 62
吸湿性	0.6 / *	%	类似ISO 62
密度	1230 / 1230	kg/m³	ISO 1183

函数

典型数据

加工方法

注塑

供货形式

粒料

添加剂

脱模助剂

特殊性能

经光稳处理的/耐光的, 经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 250°C / 265°C / 280°C.
- Typical mold temperature : 40 – 90°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 80-90°C.

耐化学性

酸类
	醋酸 (5g/100g) (23°C)
	柠檬酸溶液 (10g/100g) (23°C)
	乳酸 (10g/100g) (23°C)
	盐酸 (36g/100g) (23°C)
	硝酸 (40g/100g) (23°C)
	硫酸 (38g/100g) (23°C)
	硫酸 (5g/100g) (23°C)
	铬酸溶液 (40g/100g) (23°C)
碱类
	氢氧化钠溶液 (35g/100g) (23°C)
	氢氧化钠溶液 (1g/100g) (23°C)
	氨水(氢氧化铵) (10g/100g) (23°C)
醇类
	甲醇 (23°C)
	乙醇 (23°C)
碳氢化合物
	正乙烷 (23°C)
	甲苯 (23°C)
酮类
	丙酮 (23°C)
矿物油
	SAE 10W40号多效润滑油 (23°C)
	SAE 10W40号多效润滑油 (130°C)
	SAE 89/90号变速箱润滑油 (130°C)
	绝缘油 (23°C)
标准燃油
	ISO 1817 燃油1号 (60°C)
	ISO 1817 燃油2号 (60°C)
	ISO 1817 燃油3号 (60°C)
	ISO 1817 燃油4号 (60°C)
	不含酒精的标准燃油(优先使用C类ISO 1817 燃油) (23°C)
	含酒精的标准燃油(优先使用4号ISO 1817 燃油) (23°C)
	柴油(优先使用F类ISO 1817液体) (23°C)
	柴油(优先使用F类ISO 1817液体) (90°C)
	柴油(优先使用F类ISO 1817液体) (>90°C)
盐溶液
	氯化钠溶液(10g/100g) (23°C)
	次氯化钠溶液 (10g/100g) (23°C)
	氯化锌溶液 (50g/100g) (23°C)
其它
	乙酸乙酯 (23°C)
	过氧化氢 (23°C)
	DOT4号刹车油 (130°C)
	乙二醇水溶液 (50g/100g) (108°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.