Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® 8020 - PA* - ARKEMA

Material Data Center offers the following functions for Rilsan® 8020:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Rilsan® 8020 resin is a translucent flexible copolyamide based on renewable resources and without plasticizer.
This grade is specially designed for medical uses.


Main applications:
  • Catheter
  • alloon catheter


Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
机械性能干 / 已调节单位Test Standard
ISO数据
屈服应力 - / 24 MPa ISO 527
屈服伸长率 - / 21 % ISO 527
名义断裂伸长率 - / >50 % ISO 527
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 172 / * °C ISO 11357-1/-3
其它性能干 / 已调节单位Test Standard
吸水性 0.8 / * % 类似ISO 62
密度 1020 / - kg/m³ ISO 1183
典型数据
加工方法
异型材挤出成型
供货形式
粒料
Certifications
生物相容
应用
药物
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
其他信息
其E烦龀尚

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 220°C / 235°C / 250°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80°C.
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.