Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® BMNO MED - PA11 - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 其它性能

Any use of this information falls under the rules of our disclaimer.

材料文字说明

PA11, MHL, 12-010
Rilsan® BMNO MED resin is a polyamide 11 produced from a renewable source. This natural grade dedicated to injection offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.
 
Upon request letters regarding USP Class VI compliance can be provided.




Main applications:

• Medical molded components such as needle fittings for syringes
• Minimally invasive devices

Packaging:
This grade is delivered dried in sealed packaging (44 lb bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	30 / *	cm³/10min	ISO 1133
温度	235 / *	°C	-
载荷	2.16 / *	kg	-
模塑收缩率, 平行	1.1 / *	%	ISO 294-4, 2577
模塑收缩率, 垂直	0.9 / *	%	ISO 294-4, 2577

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	- / 1280	MPa	ISO 527
屈服应力	- / 41	MPa	ISO 527
屈服伸长率	- / 5	%	ISO 527
名义断裂伸长率	- / >50	%	ISO 527
简支梁缺口冲击强度, +23°C	- / 8.3	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	- / 10.5	kJ/m²	ISO 179/1eA
肖氏硬度D	68 / *	-	ISO 7619-1

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	189 / *	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	50 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	145 / *	°C	ISO 75-1/-2

其它性能	干 / 已调节	单位	Test Standard
密度	1030 / 1030	kg/m³	ISO 1183
Biobased content	100	%	-

典型数据

加工方法

注塑

供货形式

粒料

Certifications

生物相容, 医用级, US药物六级认证

应用

药物

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 240°C / 270°C / 290°C.
- Mold temperature : 25 - 60°C

- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80-90°C.

耐化学性

酸类
	醋酸 (5g/100g) (23°C)
	柠檬酸溶液 (10g/100g) (23°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.