Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Safron® H510-02 - PP - Safripol (Pty) Ltd

Material Data Center offers the following functions for Safron® H510-02:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Safron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑） - 加工推荐（挤出）
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 2 g/10min ISO 1133
温度 230 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ISO数据
屈服应力 31 MPa ISO 527
屈服伸长率 8.5 % ISO 527
弯曲模量, 23°C 1360 MPa ISO 178
简支梁缺口冲击强度, +23°C 6.8 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 53 °C ISO 75-1/-2
热变形温度, 0.45 MPa 85 °C ISO 75-1/-2
维卡软化温度, B 90 °C ISO 306
其它性能价值单位Test Standard
密度 900 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
1区 190 °C -
2区 220 - 230 °C -
3区 240 - 250 °C -
4区 245 °C -
喷嘴温度 240 °C -
加工推荐（挤出）价值单位Test Standard
1区 190 °C -
2区 215 °C -
3区 240 °C -
4区 250 °C -
喷嘴温度 245 °C -
典型数据
加工方法
注塑, 其它挤出成型, 吹塑
供货形式
自然色
特征
均聚物
Certifications
可食品接触的, 10/2011认证, FDA 21 CFR认证
应用
通用, 单纤纺丝
地区供应
中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.