Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SCHULAMID® 6 GF 30 - PA6-GF31 - LyondellBasell Industries

Check here, which other Schulamid datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

30% glass fibre reinforced PA 6

加工/物理特性	价值	单位	Test Standard
ASTM数据
模压收缩率, 平行	0.002	mm/mm	ASTM D 955

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	8800 / -	MPa	ISO 527
断裂应力	160 / 100	MPa	ISO 527
断裂伸长率	3.5 / 8	%	ISO 527
无缺口简支梁冲击强度, +23°C	85 / N	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	60 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	14 / 30	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	9 / -	kJ/m²	ISO 179/1eA
ASTM数据
断裂拉伸强度	137 / -	MPa	ASTM D 638
断裂伸长率	2 / -	%	ASTM D 638
弯曲模量	7701 / -	MPa	ASTM D 790
弯曲强度	177 / -	MPa	ASTM D 790
悬臂梁缺口冲击强度, 1/8 in	85.4 / -	J/m	ASTM D 256

热性能	干 / 已调节	单位	Test Standard
ISO数据
热变形温度, 1.80 MPa	200 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	215 / *	°C	ISO 75-1/-2
1.5mm名义厚度时的燃烧性	HB / *	class	IEC 60695-11-10
测试用试样的厚度	1.5 / *	mm	-
Yellow Card 现存	是的 / *	-	-
厚度为h时的燃烧性	HB / *	class	IEC 60695-11-10
测试用试样的厚度	3.0 / *	mm	-
Yellow Card 现存	是的 / *	-	-
ASTM数据
DTUL @ 66 psi	218	°C	ASTM D 648
DTUL @ 264 psi	202	°C	ASTM D 648

电性能	干 / 已调节	单位	Test Standard
ISO数据
体积电阻率	>1E13 / -	Ohm*m	IEC 62631-3-1
表面电阻率	* / >1E15	Ohm	IEC 62631-3-2

其它性能	干 / 已调节	单位	Test Standard
密度	1370 / -	kg/m³	ISO 1183
密度	1360	kg/m³	ASTM D 792

模塑测量的特殊性能	干 / 已调节	单位	Test Standard
ISO数据
粘数	145 / *	cm³/g	ISO 307, 1157, 1628

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	80	°C	-
预干燥-时间	4 - 6	h	-
注塑熔体温度	250 - 280	°C	-
模具温度	60 - 90	°C	-

函数

典型数据

加工方法

注塑

供货形式

碎粒料

添加剂

脱模助剂

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

PREPROCESSING; Pretreatment
Predrying: 4-6h / 80°C

PROCESSING ;Processing:

Melttemperature	250 - 280	°C
Mouldtemperature	60 - 90	°C

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.