Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Surpass® RMs539-U(UG) - (PE-HD) - Nova Chemicals Corp.

Material Data Center offers the following functions for Surpass® RMs539-U(UG):
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Surpass datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 5.2 g/10min ASTM D 1238
温度 190 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ASTM数据
屈服应力 20 MPa ASTM D 638
屈服伸长率 13 % ASTM D 638
热性能价值单位Test Standard
ASTM数据
UL94 燃烧性 HB - UL 94
DTUL @ 66 psi 60 °C ASTM D 648
DTUL @ 264 psi 42 °C ASTM D 648
熔点 125 °C ASTM D 3418
其它性能价值单位Test Standard
密度 939 kg/m³ ASTM D 792
典型数据
加工方法
旋转成型
供货形式
白色
添加剂
脱模助剂
特殊性能
高冲击韧性的/经抗冲改性的, 经耐紫外线处理的/耐气候的
特征
共聚物, 辛烯共聚物
耐化学试剂
抗氧化性
Certifications
可食品接触的, FDA 21 CFR认证, 可水接触的, NSF认证 61
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.