Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4315 G6 HR BK 15045 - PBT-GF30 - BASF

Material Data Center offers the following functions for Ultradur® B 4315 G6 HR BK 15045:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 模塑测量的特殊性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 15 cm³/10min ISO 1133
温度 275 °C -
载荷 2.16 kg -
模塑收缩率, 平行 0.5 % ISO 294-4, 2577
模塑收缩率, 垂直 1.1 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 9550 MPa ISO 527
断裂应力 130 MPa ISO 527
断裂伸长率 3.2 % ISO 527
简支梁冲击强度, +23°C 77 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 68 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 10 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 223 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 208 °C ISO 75-1/-2
1.5mm名义厚度时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 1.6 mm -
其它性能价值单位Test Standard
密度 1510 kg/m³ ISO 1183
Bulk density 750 kg/m³ -
模塑测量的特殊性能价值单位Test Standard
ISO数据
粘数. 102 cm³/g ISO 307, 1157, 1628
加工推荐（注塑）价值单位Test Standard
注塑熔体温度 250 - 280 °C -
模具温度 60 - 100 °C -
典型数据
加工方法
注塑
供货形式
粒料, 黑色
特征
可镭射打标, 少气味
耐化学试剂
水解稳定
应用
汽车, 电子电气
地区供应
欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.