Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4300 G6 LT BK15092 - PBT-GF30 - BASF

Material Data Center offers the following functions for Ultradur® B 4300 G6 LT BK15092:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 其它性能 - 模塑测量的特殊性能
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ISO数据
拉伸模量 10000 MPa ISO 527
断裂应力 140 MPa ISO 527
断裂伸长率 2.5 % ISO 527
弯曲模量, 23°C 9000 MPa ISO 178
简支梁冲击强度, +23°C 64 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 9.3 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 9.6 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C 9 kJ/m² ISO 180/1A
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 223 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 204 °C ISO 75-1/-2
其它性能价值单位Test Standard
吸水性 0.4 % 类似ISO 62
吸湿性 0.2 % 类似ISO 62
密度 1530 kg/m³ ISO 1183
模塑测量的特殊性能价值单位Test Standard
ISO数据
粘数. 102 cm³/g ISO 307, 1157, 1628
典型数据
加工方法
注塑
供货形式
黑色
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.