Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultraform® N2640 Z2 Q600 - (POM+PUR) - BASF

Material Data Center offers the following functions for Ultraform® N2640 Z2 Q600:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Ultraform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑） - 函数
Any use of this information falls under the rules of our disclaimer.
材料文字说明
具有高冲击强度的弹性体改性注塑等级， 用于夹具、 按扣、 紧固件和受冲击应力的元件。

根据ISO 1043-1: POM的缩写名称-HI
根据ISO 29988-POM-K,,M-GNPR,3-1的名称
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 7 cm³/10min ISO 1133
温度 190 °C -
载荷 2.16 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 2000 MPa ISO 527
屈服应力 50 MPa ISO 527
屈服伸长率 12 % ISO 527
名义断裂伸长率 45 % ISO 527
拉伸蠕变模量, 1h 1550 MPa ISO 899-1
拉伸蠕变模量, 1000h 1050 MPa ISO 899-1
无缺口简支梁冲击强度, +23°C N kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 230 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 11 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 6.5 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 167 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 85 °C ISO 75-1/-2
热变形温度, 0.45 MPa 150 °C ISO 75-1/-2
维卡软化温度, B 140 °C ISO 306
线性热膨胀系数, 平行 120 E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 1.6 mm -
Yellow Card 现存 是的 - -
厚度为h时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 0.8 mm -
电性能价值单位Test Standard
ISO数据
相对介电常数., 100Hz 4 - IEC 62631-2-1
相对介电常数., 1MHz 4 - IEC 62631-2-1
介质损耗因子, 100Hz 100 E-4 IEC 62631-2-1
介质损耗因子, 1MHz 140 E-4 IEC 62631-2-1
体积电阻率 1E12 Ohm*m IEC 62631-3-1
表面电阻率 1E14 Ohm IEC 62631-3-2
介电强度 40 kV/mm IEC 60243-1
相对漏电起痕指数 600 - IEC 60112
其它性能价值单位Test Standard
吸水性 0.8 % 类似ISO 62
吸湿性 0.2 % 类似ISO 62
密度 1370 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
注塑熔体温度 190 - 220 °C -
模具温度 60 - 80 °C -
函数
粘度－剪切速度 , Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
剪切应力－剪切速度 , Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
动态剪切模量－温度 , Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
应力－应变. , Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
正割模量－应变. , Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
应力－应变(等时的) 23°C, Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
蠕变模量－时间. 23°C, Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
蠕变曲线 23°C, Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
应力－应变(等时的) 40°C, Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
蠕变模量－时间. 40°C, Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
蠕变曲线 40°C, Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
应力－应变(等时的) 80°C, Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
蠕变模量－时间. 80°C, Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
蠕变曲线 80°C, Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
比容－温度(pvT) , Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
拉伸模量－温度 , Ultraform® N2640 Z2 Q600, (POM+PUR), BASF
典型数据
加工方法
注塑
供货形式
粒料
添加剂
脱模助剂
特征
共聚物
地区供应
北美
其他信息
注塑成型
PROCESSING
injection molding, Melt temperature, range: 190 - 220 °C
injection molding, Melt temperature, recommended: 200 °C
injection molding, Mold temperature, range: 60 - 80 °C
injection molding, Mold temperature, recommended: 80 °C
耐化学性
酸类
醋酸 (5g/100g) (23°C)
乳酸 (10g/100g) (23°C)
盐酸 (36g/100g) (23°C)
硝酸 (40g/100g) (23°C)
硫酸 (38g/100g) (23°C)
硫酸 (5g/100g) (23°C)
铬酸溶液 (40g/100g) (23°C)
碱类
氢氧化钠溶液 (35g/100g) (23°C)
氢氧化钠溶液 (1g/100g) (23°C)
氨水(氢氧化铵) (10g/100g) (23°C)
醇类
异丙醇 (23°C)
甲醇 (23°C)
乙醇 (23°C)
碳氢化合物
正乙烷 (23°C)
甲苯 (23°C)
异辛烷 (23°C)
酮类
丙酮 (23°C)
醚类
(二)乙醚 (23°C)
矿物油
SAE 10W40号多效润滑油 (130°C)
SAE 89/90号变速箱润滑油 (130°C)
标准燃油
ISO 1817 燃油1号 (60°C)
ISO 1817 燃油2号 (60°C)
ISO 1817 燃油3号 (60°C)
ISO 1817 燃油4号 (60°C)
不含酒精的标准燃油(优先使用C类ISO 1817 燃油) (23°C)
含酒精的标准燃油(优先使用4号ISO 1817 燃油) (23°C)
柴油(优先使用F类ISO 1817液体) (23°C)
柴油(优先使用F类ISO 1817液体) (>90°C)
盐溶液
氯化钠溶液(10g/100g) (23°C)
次氯化钠溶液 (10g/100g) (23°C)
碳酸钠溶液 (20g/100g) (23°C)
碳酸钠溶液 (2g/100g) (23°C)
其它
乙酸乙酯 (23°C)
过氧化氢 (23°C)
DOT4号刹车油 (130°C)
乙二醇水溶液 (50g/100g) (108°C)
油酸 (50g/100g) + 橄榄油 (50g/100g) (23°C)
水 (23°C)
去离子水 (90°C)
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.