Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced N2U40G7 LS BK - PA9T-GF35 FR - BASF

Material Data Center offers the following functions for Ultramid® Advanced N2U40G7 LS BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
该产品是一种无卤阻燃高温聚酰胺，具有高流动性、耐高温表面贴装技术（SMT）、优异的机械性能和高尺寸稳定性，这些都使其非常适合电子电气应用，尤其是各种薄壁连接器和插座。
加工/物理特性干 / 已调节单位Test Standard
ISO数据
熔体体积流动速度, MVR 25 / * cm³/10min ISO 1133
温度 325 / * °C -
载荷 2.16 / * kg -
模塑收缩率, 平行 0.2 / * % ISO 294-4, 2577
模塑收缩率, 垂直 0.8 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 12500 / - MPa ISO 527
断裂应力 150 / - MPa ISO 527
断裂伸长率 2 / - % ISO 527
无缺口简支梁冲击强度, +23°C 60 / - kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 13 / - kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 305 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 275 / * °C ISO 75-1/-2
线性热膨胀系数, 平行 14 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 62 / * E-6/K ISO 11359-1/-2
电性能干 / 已调节单位Test Standard
ISO数据
相对漏电起痕指数 - / 600 - IEC 60112
其它性能干 / 已调节单位Test Standard
密度 1490 / - kg/m³ ISO 1183
模塑测量的特殊性能干 / 已调节单位Test Standard
ISO数据
粘数 70 / * cm³/g ISO 307, 1157, 1628
加工推荐（注塑）价值单位Test Standard
预干燥-温度 120 °C -
预干燥-时间 6 - 8 h -
加工湿度 ≤0.1 % -
注塑熔体温度 300 - 330 °C -
模具温度 100 - 140 °C -
典型数据
加工方法
注塑
供货形式
粒料, 黑色
特殊性能
阻燃的, 无卤
应用
电子电气
地区供应
亚太
其他信息
注塑成型
PREPROCESSING
Pre/Post-processing, max. allowed water content: .1 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 6 - 8 h

PROCESSING
injection molding, Melt temperature, range: 310 - 340 °C
injection molding, Melt temperature, recommended: 330 °C
injection molding, Mold temperature, range: 100 - 160 °C
injection molding, Mold temperature, recommended: 140 °C
injection molding, Dwell time, thermoplastics: 5 min
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.