Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® 4000 CC20 - PEEK-MX20 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® 4000 CC20:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Ceramic-filled (20%), high viscosity polyether ether ketone

VESTAKEEP® 4000 CC20 is a ceramic-filled (20%) polyether ether ketone for injection molding and extrusion.

The semi-crystalline polymer features superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP® 4000 CC20 are of low flammability.

VESTAKEEP® 4000 CC20 can be processed on common injection molding machines for thermoplastics.

We recommend a melt temperature of 380°C to 400°C during the injection molding process. The mold temperature should be in a range of 160°C to 200°C, preferably 180°C.

VESTAKEEP® 4000 CC20 is supplied as cylindrical pellets in 25 kg boxes with moisture-proof polyethylene liners.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAKEEP® 4000 CC20, please follow the general recommendations in our brochure “VESTAKEEP® PEEK Processing Guidelines“.

Pigmentation may affect the values.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT WWW.INDUSTRIAL.VESTAKEEP.COM
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 10 cm³/10min ISO 1133
温度 380 °C -
载荷 5 kg -
模塑收缩率, 平行 0.7 % ISO 294-4, 2577
模塑收缩率, 垂直 1.0 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 4300 MPa ISO 527
屈服应力 95 MPa ISO 527
屈服伸长率 5 % ISO 527
名义断裂伸长率 20 % ISO 527
无缺口简支梁冲击强度, +23°C N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 7 kJ/m² ISO 179/1eA
Type of failure C - -
简支梁缺口冲击强度, -30°C 7 kJ/m² ISO 179/1eA
Type of failure C - -
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 340 °C ISO 11357-1/-3
玻璃化转变温度, 10°C/min 153 °C ISO 11357-1/-2
热变形温度, 1.80 MPa 155 °C ISO 75-1/-2
热变形温度, 0.45 MPa 210 °C ISO 75-1/-2
维卡软化温度, B 305 °C ISO 306
线性热膨胀系数, 平行 45 E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 V-0 class IEC 60695-11-10
测试用试样的厚度 1.6 mm -
电性能价值单位Test Standard
ISO数据
相对介电常数., 1MHz 3.8 - IEC 62631-2-1
介质损耗因子, 1MHz 200 E-4 IEC 62631-2-1
其它性能价值单位Test Standard
吸水性 0.4 % 类似ISO 62
密度 1490 kg/m³ ISO 1183
典型数据
加工方法
注塑, 其它挤出成型
供货形式
粒料, 碎粒料
特殊性能
经热稳处理的/耐热的
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
耐化学性
酸类
醋酸 (5g/100g) (23°C)
柠檬酸溶液 (10g/100g) (23°C)
盐酸 (36g/100g) (23°C)
硝酸 (40g/100g) (23°C)
硫酸 (5g/100g) (23°C)
铬酸溶液 (40g/100g) (23°C)
碱类
氢氧化钠溶液 (35g/100g) (23°C)
氢氧化钠溶液 (1g/100g) (23°C)
氨水(氢氧化铵) (10g/100g) (23°C)
醇类
异丙醇 (23°C)
甲醇 (23°C)
乙醇 (23°C)
碳氢化合物
正乙烷 (23°C)
甲苯 (23°C)
异辛烷 (23°C)
酮类
丙酮 (23°C)
醚类
(二)乙醚 (23°C)
矿物油
SAE 10W40号多效润滑油 (23°C)
绝缘油 (23°C)
标准燃油
不含酒精的标准燃油(优先使用C类ISO 1817 燃油) (23°C)
含酒精的标准燃油(优先使用4号ISO 1817 燃油) (23°C)
柴油(优先使用F类ISO 1817液体) (23°C)
盐溶液
氯化钠溶液(10g/100g) (23°C)
次氯化钠溶液 (10g/100g) (23°C)
碳酸钠溶液 (20g/100g) (23°C)
碳酸钠溶液 (2g/100g) (23°C)
氯化锌溶液 (50g/100g) (23°C)
其它
乙酸乙酯 (23°C)
过氧化氢 (23°C)
乙二醇水溶液 (50g/100g) (108°C)
水 (23°C)
去离子水 (90°C)
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.