Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® D16 - PA612 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® D16:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数
Any use of this information falls under the rules of our disclaimer.
材料文字说明

Medium-viscosity PA612 resin

VESTAMID® D16 is a medium-viscosity Polyamide 612 compound for extrusion and injection moulding of e.g. monofilaments (toothbrush bristles).

The material based on  PA612 absorbs only small amounts of water. Components made of this material  therefore show excellent dimensional stability under changing ambient humidity.

VESTAMID® D16 is supplied as cylindrical granules in moisture-proof polyethylene containers ready for processing.

Pigmentation may affect values.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

加工/物理特性干 / 已调节单位Test Standard
ISO数据
熔体体积流动速度, MVR 75 / * cm³/10min ISO 1133
温度 240 / * °C -
载荷 5 / * kg -
模塑收缩率, 平行 1.3 / * % ISO 294-4, 2577
模塑收缩率, 垂直 1.4 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 2200 / 1700 MPa ISO 527
屈服应力 58 / 53 MPa ISO 527
屈服伸长率 4 / 16 % ISO 527
名义断裂伸长率 >50 / >50 % ISO 527
无缺口简支梁冲击强度, +23°C N / N kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C N / N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 5 / 6 kJ/m² ISO 179/1eA
Type of failure C / C - -
简支梁缺口冲击强度, -30°C 6 / 6 kJ/m² ISO 179/1eA
Type of failure C / C - -
冲孔最大力, +23°C 4380 / - N ISO 6603-2
冲孔最大力, -30°C 5690 / - N ISO 6603-2
冲孔功, +23°C 53 / - J ISO 6603-2
冲孔功, -30°C 60 / - J ISO 6603-2
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 215 / * °C ISO 11357-1/-3
玻璃化转变温度, 10°C/min 45 / * °C ISO 11357-1/-2
热变形温度, 1.80 MPa 65 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 150 / * °C ISO 75-1/-2
维卡软化温度, B 180 / * °C ISO 306
线性热膨胀系数, 平行 130 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 120 / * E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 HB / * class IEC 60695-11-10
测试用试样的厚度 1.6 / * mm -
电性能干 / 已调节单位Test Standard
ISO数据
相对介电常数., 100Hz 3.8 / 4.5 - IEC 62631-2-1
相对介电常数., 1MHz 3.2 / 4.1 - IEC 62631-2-1
介质损耗因子, 100Hz 240 / 590 E-4 IEC 62631-2-1
介质损耗因子, 1MHz 290 / 510 E-4 IEC 62631-2-1
体积电阻率 >1E13 / 1E12 Ohm*m IEC 62631-3-1
介电强度 28 / 27 kV/mm IEC 60243-1
其它性能干 / 已调节单位Test Standard
吸水性 2.7 / * % 类似ISO 62
吸湿性 1 / * % 类似ISO 62
密度 1060 / - kg/m³ ISO 1183
函数
粘度－剪切速度 , VESTAMID® D16, PA612, Evonik
剪切应力－剪切速度 , VESTAMID® D16, PA612, Evonik
动态剪切模量－温度 , VESTAMID® D16 (烘干), PA612, Evonik
应力－应变. , VESTAMID® D16 (烘干), PA612, Evonik
正割模量－应变. , VESTAMID® D16 (烘干), PA612, Evonik
应力－应变(等时的) 23°C, VESTAMID® D16 (状况), PA612, Evonik
蠕变模量－时间. 23°C, VESTAMID® D16 (状况), PA612, Evonik
蠕变曲线 23°C, VESTAMID® D16 (状况), PA612, Evonik
比容－温度(pvT) , VESTAMID® D16, PA612, Evonik
典型数据
加工方法
注塑, 异型材挤出成型, 其它挤出成型
供货形式
粒料
应用
单纤纺丝
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
耐化学性
酸类
醋酸 (5g/100g) (23°C)
柠檬酸溶液 (10g/100g) (23°C)
碱类
氢氧化钠溶液 (35g/100g) (23°C)
氢氧化钠溶液 (1g/100g) (23°C)
氨水(氢氧化铵) (10g/100g) (23°C)
醇类
异丙醇 (23°C)
甲醇 (23°C)
乙醇 (23°C)
碳氢化合物
正乙烷 (23°C)
甲苯 (23°C)
异辛烷 (23°C)
酮类
丙酮 (23°C)
醚类
(二)乙醚 (23°C)
盐溶液
氯化钠溶液(10g/100g) (23°C)
碳酸钠溶液 (20g/100g) (23°C)
碳酸钠溶液 (2g/100g) (23°C)
其它
乙酸乙酯 (23°C)
过氧化氢 (23°C)
水 (23°C)
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.