Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® AST44 - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® AST44:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Vydyne AST44 is an impact modified PA66 for injection molded applications.
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 1900 / - MPa ISO 527
屈服应力 50 / - MPa ISO 527
屈服伸长率 4.6 / - % ISO 527
无缺口简支梁冲击强度, +23°C 100 / - kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 100 / - kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 80 / - kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 65 / - kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
线性热膨胀系数, 平行 100 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 120 / * E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 HB / * class IEC 60695-11-10
电性能干 / 已调节单位Test Standard
ISO数据
体积电阻率 >1E13 / - Ohm*m IEC 62631-3-1
其它性能干 / 已调节单位Test Standard
吸湿性 1.5 / * % 类似ISO 62
密度 1070 / - kg/m³ ISO 1183
典型数据
加工方法
注塑
供货形式
粒料
添加剂
脱模助剂
特殊性能
高冲击韧性的/经抗冲改性的
地区供应
北美, 欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.