Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® AVS4CC1 BK0888 - PA66-GF35 - Ascend

Material Data Center offers the following functions for Vydyne® AVS4CC1 BK0888:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Vydyne AVS4CC1 BK0888 is part of Ascend's Anti-Vibration System portfolio. AVS4CC1 BK0888 is a 35% glass filled specialty compound that is specifically designed to provide an improvement in damping performance for critical NVH components without sacrificing the mechanical stiffness.
加工/物理特性干 / 已调节单位Test Standard
ISO数据
模塑收缩率, 平行 0.3 / * % ISO 294-4, 2577
模塑收缩率, 垂直 0.8 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 11500 / 9300 MPa ISO 527
断裂应力 199 / 139 MPa ISO 527
断裂伸长率 2.7 / 4 % ISO 527
无缺口简支梁冲击强度, +23°C 77 / 79 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 64 / 60 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 11 / 12 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 10 / 9.1 kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 260 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 247 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 260 / * °C ISO 75-1/-2
线性热膨胀系数, 平行 21 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 85 / * E-6/K ISO 11359-1/-2
电性能干 / 已调节单位Test Standard
ISO数据
介电强度 27 / 26 kV/mm IEC 60243-1
其它性能干 / 已调节单位Test Standard
吸水性 1.1 / * % 类似ISO 62
吸湿性 1.7 / * % 类似ISO 62
密度 1420 / - kg/m³ ISO 1183
典型数据
加工方法
注塑
供货形式
粒料, 黑色
添加剂
润滑剂
特殊性能
经热稳处理的/耐热的
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.