Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Zedex® ZX-100EL63 - PET... - Wolf Kunststoff-Gleitlager GmbH

Material Data Center offers the following functions for Zedex® ZX-100EL63:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Zedex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
For more detailed information, please read our
or contact our representatives in your region.
机械性能价值单位Test Standard
ISO数据
拉伸模量 310 MPa ISO 527
拉伸强度 38 MPa ISO 527
屈服应力 19 MPa ISO 527
屈服伸长率 16 % ISO 527
断裂应力 35 MPa ISO 527
断裂伸长率 >50 % ISO 527
弯曲模量, 23°C 400 MPa ISO 178
简支梁冲击强度, +23°C N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C N kJ/m² ISO 179/1eA
球压硬度 35 MPa ISO 2039-1
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 110 °C ISO 75-1/-2
厚度为h时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 3.2 mm -
电性能价值单位Test Standard
ISO数据
体积电阻率 1E12 Ohm*m IEC 62631-3-1
表面电阻率 4E12 Ohm IEC 62631-3-2
介电强度 22 kV/mm IEC 60243-1
其它性能价值单位Test Standard
吸水性 0.2 % 类似ISO 62
密度 1230 kg/m³ ISO 1183
典型数据
加工方法
注塑
供货形式
碎粒料, 黑色
特殊性能
经耐紫外线处理的/耐气候的
特征
软质
耐化学试剂
通用耐化学性
Certifications
可食品接触的, FDA 21 CFR认证, 可水接触的
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.