Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC A 1000/22 - UP-GF22 - Polynt S.p.A.

Material Data Center offers the following functions for BMC A 1000/22:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
加工/物理特性价值单位Test Standard
ISO数据
模塑收缩率, 平行 0.1 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
简支梁冲击强度, +23°C 30 kJ/m² ISO 179/1eU
洛克硬度 M 80 - ISO 2039-2
Other Standards[S]
弯曲模量, 23°C 9000 MPa ISO 14125A
弯曲强度 90 MPa ISO 14125A
S: These properties are reported by the producer according standards that are different to our defaults.
电性能价值单位Test Standard
ISO数据
表面电阻率 1E14 Ohm IEC 62631-3-2
其它性能价值单位Test Standard
吸水性 0.2 % 类似ISO 62
密度 1800 kg/m³ ISO 1183
典型数据
加工方法
模压成型
供货形式
块状模材料
耐化学试剂
耐酸性, 耐碱性
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.