Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BorSafe™ HE3490-LS-H - (PE-HD)-CD2 - Borealis A/S

Material Data Center offers the following functions for BorSafe™ HE3490-LS-H:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other BorSafe datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 0.25 g/10min ISO 1133
温度 190 °C -
负载 5 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 1100 MPa ISO 527
屈服应力 25 MPa ISO 527
断裂伸长率 600 % ISO 527
其它性能价值单位Test Standard
密度 960 kg/m³ ISO 1183
加工推荐(挤出)价值单位Test Standard
注塑熔体温度 200 - 220 °C -
1区 190 - 210 °C -
喷嘴温度 200 - 210 °C -
典型数据
加工方法
异型材挤出成型, 片材挤出成型, 其它挤出成型
供货形式
黑色
特殊性能
经耐紫外线处理的/耐气候的
特征
脆性, 共聚物, 己烯共聚物
耐化学试剂
耐环境应力裂纹性
Certifications
可水接触的
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.