Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CELSTRAN® PA66-GF40-02P11/15 - PA66-GLF40 - Celanese

Check here, which other Celstran datasheets, application examples or technical articles are available in Material Data Center

机械性能 - 热性能 - 其它性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	13700 / 10000	MPa	ISO 527
断裂应力	190 / 160	MPa	ISO 527
断裂伸长率	1.6 / 2	%	ISO 527
无缺口简支梁冲击强度, +23°C	40 / 45	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	41 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	23 / 18	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	23 / -	kJ/m²	ISO 179/1eA

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	261 / *	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	255 / *	°C	ISO 75-1/-2
热变形温度, 8.00 MPa	240 / *	°C	ISO 75-1/-2

其它性能	干 / 已调节	单位	Test Standard
密度	- / 1460	kg/m³	ISO 1183

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	80	°C	-
预干燥-时间	4	h	-
注塑熔体温度	300 - 315	°C	-
模具温度	90 - 120	°C	-

函数

典型数据

加工方法

注塑, 异型材挤出成型, 片材挤出成型, 其它挤出成型, 吹塑, 模压/烧结成型

供货形式

粒料

添加剂

润滑剂

特殊性能

经热稳处理的/耐热的

特征

Long fiber reinforced

地区供应

北美, 欧洲, 亚太

其他信息

注塑成型

It is recommended to dry in a dehumidifying dryer: 4 hours at 80 °C.

During the processing of CELSTRAN it is important to watch and
control melt shear, for excessive shear reduces fiber length and
mechanical performance as well.

Processing recommendation:

- Conventional 3 zone screw, screw diameter minimum 40 mm
- Design flow channels for low melt shear
- Back pressure and screw rotation to realize a continous
plastification performance and thus a homogeneous melt.
- Apply higher temperature settings than for short fiber compounds

Melt temperature (in the screw anteroom) 300-315 °C
Mold surface temperature 90-120 °C

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.