Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DURANEX® 330NF - PBT-GF30 - Polyplastics

Material Data Center offers the following functions for DURANEX® 330NF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Duranex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ISO数据
拉伸强度 100 MPa ISO 527
断裂伸长率 1.7 % ISO 527
弯曲模量, 23°C 10100 MPa ISO 178
弯曲强度 147 MPa ISO 178
简支梁缺口冲击强度, +23°C 7 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 214 °C ISO 75-1/-2
厚度为h时的燃烧性 V-0 class IEC 60695-11-10
测试用试样的厚度 0.4 mm -
Yellow Card 现存 是的 - -
灼热丝燃烧指数 (GWFI) 960 °C IEC 60695-2-12
电性能价值单位Test Standard
ISO数据
体积电阻率 3E14 Ohm*m IEC 62631-3-1
表面电阻率 4E16 Ohm IEC 62631-3-2
介电强度 22 kV/mm IEC 60243-1
相对漏电起痕指数 600 - IEC 60112
ASTM数据
耐电弧性 128 s ASTM D 495
其它性能价值单位Test Standard
密度 1570 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
模具温度 60 °C -
1区 230 °C -
2区 260 °C -
3区 260 °C -
注射速度 67 mm/s -
典型数据
加工方法
注塑
特殊性能
阻燃的, 无卤, 经光稳处理的/耐光的, 经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的
Certifications
RoHS
应用
电子电气
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.