Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Flexirene® FG 20 I - (PE-LLD) - Versalis S.p.A

Material Data Center offers the following functions for Flexirene® FG 20 I:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Flexirene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 1 g/10min ISO 1133
温度 190 °C -
负载 2.16 kg -
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 120 °C ISO 11357-1/-3
线性热膨胀系数, 平行 45 E-6/K ISO 11359-1/-2
光学特性价值单位Test Standard
ISO Data
光泽度, 45° 57 - ISO 2813
浑浊率 10 - ISO 14782
其它性能价值单位Test Standard
密度 920 kg/m³ ISO 1183
机械性能(薄膜)价值单位Test Standard
ISO数据
屈服应力, 平行 11 MPa ISO 527-3
屈服应力, normal 11 MPa ISO 527-3
断裂应力, 垂直 35 MPa ISO 527-3
最大应变, 平行 550 % ISO 527-3
最大应变, normal 800 % ISO 527-3
动态摩擦系数 0.5 - ISO 8295
挤出形式 麓碌陇 - -
试样厚度 0.025 mm -
典型数据
加工方法
吹塑挤出成型
供货形式
粒料
特征
共混树脂, 共聚物, 丁烯共聚物
耐化学试剂
抗氧化性
应用
通用
地区供应
欧洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.