Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Greenflex® FF 55 - EVAC - Versalis S.p.A

Material Data Center offers the following functions for Greenflex® FF 55:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Greenflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 机械性能(薄膜)
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 0.7 g/10min ISO 1133
温度 190 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ISO数据
肖氏硬度A 89 - ISO 7619-1
肖氏硬度D 38 - ISO 7619-1
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 84 °C ISO 11357-1/-3
线性热膨胀系数, 平行 36 E-6/K ISO 11359-1/-2
光学特性价值单位Test Standard
ISO Data
光泽度, 45° 87 - ISO 2813
浑浊率 1 - ISO 14782
机械性能(薄膜)价值单位Test Standard
ISO数据
屈服应力, 平行 5 MPa ISO 527-3
屈服应力, normal 5 MPa ISO 527-3
断裂应力, 垂直 34 MPa ISO 527-3
最大应变, 平行 500 % ISO 527-3
最大应变, normal 700 % ISO 527-3
动态摩擦系数 0.5 - ISO 8295
挤出形式 麓碌陇 - -
试样厚度 0.07 mm -
典型数据
加工方法
吹塑挤出成型
供货形式
粒料
特殊性能
高冲击韧性的/经抗冲改性的
特征
共聚物
应用
包装
地区供应
欧洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.