Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hostalen CRP 100 RCD BLACK - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Hostalen CRP 100 RCD BLACK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Hostalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑） - 加工推荐（挤出）
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 0.23 g/10min ISO 1133
温度 190 °C -
负载 5 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 1100 MPa ISO 527
屈服应力 23 MPa ISO 527
屈服伸长率 9 % ISO 527
断裂伸长率 650 % ISO 527
拉伸蠕变模量, 1h 850 MPa ISO 899-1
简支梁缺口冲击强度, +23°C 26 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 13 kJ/m² ISO 179/1eA
肖氏硬度D 63 - ISO 7619-1
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 129 °C ISO 11357-1/-3
维卡软化温度, B 74 °C ISO 306
其它性能价值单位Test Standard
密度 958 kg/m³ ISO 1183
Bulk density 580 kg/m³ -
加工推荐（注塑）价值单位Test Standard
注塑熔体温度 190 - 230 °C -
加工推荐（挤出）价值单位Test Standard
注塑熔体温度 190 - 230 °C -
典型数据
加工方法
注塑, 管材挤出, 片材挤出成型, 模压成型
供货形式
粒料, 黑色
特殊性能
经耐紫外线处理的/耐气候的
特征
防蠕变, 热稳定性, 可焊的
耐化学试剂
通用耐化学性, 耐环境应力裂纹性, 水解稳定
Certifications
可食品接触的, 可水接触的
应用
建材
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.