Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylon® N1213HL BK - PA66-GF13 - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylon® N1213HL BK:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性干 / 已调节单位Test Standard
ISO数据
模塑收缩率, 平行 0.8 / * % ISO 294-4, 2577
ASTM数据
模压收缩率, 平行 0.00075 mm/mm ASTM D 955
机械性能干 / 已调节单位Test Standard
ISO数据
屈服应力 103 / - MPa ISO 527
弯曲模量, 23°C 4480 / - MPa ISO 178
悬臂梁缺口冲击强度, +23°C 3 / - kJ/m² ISO 180/1A
ASTM数据
屈服应力 103 / - MPa ASTM D 638
断裂伸长率 2 / - % ASTM D 638
弯曲模量 4480 / - MPa ASTM D 790
弯曲强度 165 / - MPa ASTM D 790
洛克硬度 M 95 / - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 37 / - J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
热释放速率, 平行 27 E-6/K ASTM D 696
DTUL @ 264 psi 235 °C ASTM D 648
其它性能干 / 已调节单位Test Standard
密度 1230 / - kg/m³ ISO 1183
吸水率, 24小时 1 % ASTM D 570
密度 1230 kg/m³ ASTM D 792
典型数据
供货形式
粒料, 黑色
添加剂
润滑剂
特殊性能
经热稳处理的/耐热的
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.