Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KEBAFORM C 904 CF - ABS-CF20 - Barlog plastics GmbH

Material Data Center offers the following functions for KEBAFORM C 904 CF:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kebaform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 3.5 g/10min ISO 1133
温度 190 °C -
负载 2.16 kg -
模塑收缩率, 平行 0.2 % ISO 294-4, 2577
模塑收缩率, 垂直 0.6 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 15000 MPa ISO 527
断裂应力 115 MPa ISO 527
断裂伸长率 2.5 % ISO 527
简支梁冲击强度, +23°C 100 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 4.5 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 166 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 162 °C ISO 75-1/-2
电性能价值单位Test Standard
ISO数据
体积电阻率 10000 Ohm*m IEC 62631-3-1
表面电阻率 100 Ohm IEC 62631-3-2
其它性能价值单位Test Standard
密度 1460 kg/m³ ISO 1183
典型数据
特殊性能
提高导电性
特征
Tribologic Grade, 共聚物
耐化学试剂
通用耐化学性
应用
汽车
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.