Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEONA™ 1302S - PA66 - Asahi Kasei

Material Data Center offers the following functions for LEONA™ 1302S:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Leona datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 3000 / 1200 MPa ISO 527
屈服应力 82 / 52 MPa ISO 527
屈服伸长率 4 / 24 % ISO 527
断裂伸长率 - / >50 % ISO 527
弯曲模量, 23°C 2700 / 1100 MPa ISO 178
简支梁冲击强度, +23°C N / N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 6 / 15 kJ/m² ISO 179/1eA
洛克硬度 R 120 - ISO 2039-2
ASTM数据
拉伸强度 79 / 57 MPa ASTM D 638
断裂伸长率 50 / 250 % ASTM D 638
弯曲模量 8200 / 1200 MPa ASTM D 790
弯曲强度 118 / 54 MPa ASTM D 790
洛克硬度 M 80 / - ASTM D 785
Taber耐磨损性 7 mg/1000 cycles ASTM D 1044
悬臂梁缺口冲击强度, 1/8 in 39 / 147 J/m ASTM D 256
热性能干 / 已调节单位Test Standard
ISO数据
热变形温度, 1.80 MPa 70 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 190 / * °C ISO 75-1/-2
厚度为h时的燃烧性 V-2 / * class IEC 60695-11-10
测试用试样的厚度 1.6 / * mm -
ASTM数据
UL94 燃烧性 V-2 - UL 94
测试厚度 1.6 mm -
热释放速率, 平行 79.9 E-6/K ASTM D 696
DTUL @ 66 psi 230 °C ASTM D 648
DTUL @ 264 psi 70 °C ASTM D 648
氧指数 26 % ASTM D 2863
电性能干 / 已调节单位Test Standard
ISO数据
体积电阻率 1E12 / - Ohm*m IEC 62631-3-1
介电强度 20 / - kV/mm IEC 60243-1
相对漏电起痕指数 575 / - - IEC 60112
其它性能干 / 已调节单位Test Standard
吸湿性 2.5 / * % 类似ISO 62
密度 1140 / - kg/m³ ISO 1183
密度 1140 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 80 - 90 °C -
预干燥-时间 2 - 3 h -
注塑熔体温度 270 - 290 °C -
模具温度 75 - 85 °C -
典型数据
加工方法
注塑
特殊性能
经热稳处理的/耐热的
特征
颜色稳定性
应用
汽车
地区供应
北美, 欧洲, 亚太, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.