Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® S ECO 778TE BC30 - ASA - INEOS Styrolution

Material Data Center offers the following functions for Luran® S ECO 778TE BC30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（挤出）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 39 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 30 %
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 5 cm³/10min ISO 1133
温度 220 °C -
载荷 10 kg -
模塑收缩率, 平行 0.6 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 2500 MPa ISO 527
屈服应力 54 MPa ISO 527
屈服伸长率 3.4 % ISO 527
名义断裂伸长率 8 % ISO 527
弯曲模量, 23°C 2450 MPa ISO 178
弯曲强度 80 MPa ISO 178
简支梁冲击强度, +23°C 220 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 15 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 4 kJ/m² ISO 179/1eA
球压硬度 85 MPa ISO 2039-1
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 103[ann.] °C ISO 75-1/-2
热变形温度, 0.45 MPa 106[ann.] °C ISO 75-1/-2
维卡软化温度, B 104 °C ISO 306
线性热膨胀系数, 平行 95 E-6/K ISO 11359-1/-2
Other Standards[S]
热导率, 固态 0.17 W/(m K) DIN 52612-1
S: These properties are reported by the producer according standards that are different to our defaults.  ann.: annealed
其它性能价值单位Test Standard
吸水性 1.65 % 类似ISO 62
吸湿性 0.35 % 类似ISO 62
密度 1070 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
加工推荐（挤出）价值单位Test Standard
预干燥-温度 80 °C -
预干燥-时间 2 - 4 h -
注塑熔体温度 200 - 250 °C -
典型数据
加工方法
异型材挤出成型, 片材挤出成型, 其它挤出成型
供货形式
粒料
特殊性能
高冲击韧性的/经抗冲改性的, 经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的
耐化学试剂
通用耐化学性
Certifications
生物相容, ISCC Plus
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.