Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MAGNUM™ 3416 NA - ABS - Trinseo

Material Data Center offers the following functions for MAGNUM™ 3416 NA:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Magnum datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 8 g/10min ISO 1133
温度 220 °C -
负载 10 kg -
模塑收缩率, 平行 0.6 % ISO 294-4, 2577
模塑收缩率, 垂直 0.6 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 2180 MPa ISO 527
屈服应力 43 MPa ISO 527
屈服伸长率 3 % ISO 527
弯曲模量, 23°C 2260 MPa ISO 178
简支梁缺口冲击强度, +23°C 18 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 11 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C 20 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 12 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 -30 °C -
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 85 °C ISO 75-1/-2
维卡软化温度, B 107 °C ISO 306
其它性能价值单位Test Standard
密度 1050 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 85 °C -
预干燥-时间 3 - 4 h -
注塑熔体温度 254 - 271 °C -
模具温度 38 - 60 °C -
1区 243 °C -
2区 254 °C -
3区 260 °C -
喷嘴温度 254 °C -
典型数据
加工方法
注塑
特殊性能
经热稳处理的/耐热的
应用
汽车
地区供应
北美, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.