Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Moplen HP528N - PP - PolyMirae

Material Data Center offers the following functions for Moplen HP528N:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Moplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 12 g/10min ISO 1133
温度 230 °C -
ASTM数据
熔融指数, MFI 12 g/10min ASTM D 1238
温度 230 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 1450 MPa ISO 527
简支梁冲击强度, +23°C 80 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 2 kJ/m² ISO 179/1eA
ASTM数据
屈服应力 31.4 MPa ASTM D 638
屈服伸长率 11 % ASTM D 638
弯曲模量 1472 MPa ASTM D 790
洛克硬度 R 100 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 27.9 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
DTUL @ 66 psi 115 °C ASTM D 648
其它性能价值单位Test Standard
密度 900 kg/m³ ASTM D 792
典型数据
添加剂
防结块剂
特征
均聚物
应用
包装
地区供应
亚太, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.