Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NIRETAN B C30 - PA6-MF30 - Soredi S.p.a.

Material Data Center offers the following functions for NIRETAN B C30:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Niretan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
模压收缩率, 平行 0.009 mm/mm ASTM D 955
机械性能干 / 已调节单位Test Standard
ASTM数据
屈服应力 70 / - MPa ASTM D 638
弯曲模量 700 / - MPa ASTM D 790
弯曲强度 120 / - MPa ASTM D 790
洛克硬度 R 90 / - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 38.4 / - J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 28.8 / - J/m ASTM D 256
温度 -20 °C -
热性能干 / 已调节单位Test Standard
ISO数据
线性热膨胀系数, 垂直 60 / * E-6/K ISO 11359-1/-2
ASTM数据
UL94 燃烧性 HB - UL 94
测试厚度 1.6 mm -
DTUL @ 264 psi 120 °C ASTM D 648
熔点 220 °C ASTM D 3418
电性能干 / 已调节单位Test Standard
ISO数据
相对介电常数, 1MHz 3.5 / 4 - IEC 62631-2-1
介质损耗因子, 1MHz 200 / 1000 E-4 IEC 62631-2-1
体积电阻率 1E13 / 1E10 Ohm*m IEC 62631-3-1
表面电阻率 * / 1E13 Ohm IEC 62631-3-2
介电强度 30 / 25 kV/mm IEC 60243-1
其它性能价值单位Test Standard
吸水率, 24小时 5 % ASTM D 570
密度 1350 kg/m³ ASTM D 792
典型数据
加工方法
注塑
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.