Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of POLYFLAM® RIPP 374 ND CS1 - PP-T20 FR(17) - LyondellBasell Industries

Check here, which other Polyflam datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

20% talc filled flame retardant PP copolymer compound without PBDE

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	9	cm³/10min	ISO 1133
温度	230	°C	-
载荷	2.16	kg	-

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2100	MPa	ISO 527
屈服应力	17	MPa	ISO 527
屈服伸长率	1.7	%	ISO 527
无缺口简支梁冲击强度, +23°C	60	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	19	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	6	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	2.4	kJ/m²	ISO 179/1eA

热性能	价值	单位	Test Standard
ISO数据
热变形温度, 1.80 MPa	67	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	101	°C	ISO 75-1/-2
维卡软化温度, B	57	°C	ISO 306
1.5mm名义厚度时的燃烧性	V-0	class	IEC 60695-11-10
测试用试样的厚度	1.5	mm	-
Yellow Card 现存	是的	-	-
厚度为h时的燃烧性	V-0	class	IEC 60695-11-10
测试用试样的厚度	3.0	mm	-
Yellow Card 现存	是的	-	-
燃烧性－氧指数	27	%	ISO 4589-1/-2
ASTM数据
UL94 燃烧性	V-0	-	UL 94
测试厚度	1.6	mm	-

电性能	价值	单位	Test Standard
ISO数据
相对漏电起痕指数	600	-	IEC 60112

其它性能	价值	单位	Test Standard
密度	1370	kg/m³	ISO 1183

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	70	°C	-
预干燥-时间	2 - 4	h	-
注塑熔体温度	200 - 220	°C	-
模具温度	40 - 80	°C	-

函数

典型数据

加工方法

注塑

供货形式

碎粒料

添加剂

脱模助剂

特殊性能

阻燃的

特征

共聚物

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

PREPROCESSING; Pretreatment
Predrying usually not neccessary (2-4h / 70°C)

PROCESSING ;Processing:

Melttemperature	200 - 220	°C
Mouldtemperature	40 - 80	°C

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.