Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of PRIMACOR™ 1321 - EAA - SK Chemicals

Material Data Center offers the following functions for PRIMACOR™ 1321:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Primacor datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 2.6 g/10min ASTM D 1238
温度 190 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ASTM数据
屈服应力 10 MPa ASTM D 638
断裂拉伸强度 20.1 MPa ASTM D 638
断裂伸长率 640 % ASTM D 638
热性能价值单位Test Standard
ASTM数据
维卡温度 88.9 °C ASTM D 1525
Other Standards[S]
熔点 103 °C Dow Method
S: These properties are reported by the producer according standards that are different to our defaults.
光学特性价值单位Test Standard
ASTM数据
光泽度 76 - ASTM D 2457
雾度 3.7 % ASTM D 1003
其它性能价值单位Test Standard
密度 935 kg/m³ ASTM D 792
机械性能(薄膜)价值单位Test Standard
ASTM Data
屈服应力, 平行 11.3 MPa ASTM D 882
屈服应力, 垂直 11.1 MPa ASTM D 882
断裂拉伸强度, 平行 31.8 MPa ASTM D 882
断裂拉伸强度, 垂直 31.8 MPa ASTM D 882
断裂伸长率, 平行 460 % ASTM D 882
断裂伸长率, 垂直 510 % ASTM D 882
挤出形式 麓碌陇 - -
试样厚度 0.051 mm -
典型数据
加工方法
吹塑挤出成型, 薄膜挤出成型
供货形式
粒料, 白色
特殊性能
高冲击韧性的/经抗冲改性的
特征
好粘附性能, 共聚物
Certifications
可食品接触的, 10/2011认证, FDA 21 CFR认证, Drug Master File
应用
包装
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.