Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Provista™ UVI - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Provista™ UVI:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Provista datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 光学特性 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明

Eastman Provista™ UVI is a copolymer with an indoor/outdoor UV package added to prevent yellowing caused by  light. Eastman Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand. Compared to commonly used materials, Eastman Provista™ copolymer can often run on most standard processing equipment at increased speeds. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes.




机械性能价值单位Test Standard
ASTM数据
屈服应力 50 MPa ASTM D 638
断裂拉伸强度 29 MPa ASTM D 638
屈服伸长率 4 % ASTM D 638
断裂伸长率 109 % ASTM D 638
弯曲模量 2200 MPa ASTM D 790
弯曲强度 72 MPa ASTM D 790
洛克硬度 R 106 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 94 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 52 J/m ASTM D 256
温度 -40 °C -
Izod冲击强度, 1/8 in N J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
DTUL @ 66 psi 67 °C ASTM D 648
DTUL @ 264 psi 62 °C ASTM D 648
维卡温度 79 °C ASTM D 1525
光学特性价值单位Test Standard
ASTM数据
光泽度 171 - ASTM D 2457
雾度 0.6 % ASTM D 1003
光透射率 90 % ASTM D 1003
其它性能价值单位Test Standard
密度 1270 kg/m³ ASTM D 792
Color b 0.61 - CIE
典型数据
加工方法
异型材挤出成型
特殊性能
经光稳处理的/耐光的, 经耐紫外线处理的/耐气候的, 透明.
特征
High Gloss, 熔体强度, 共聚物
耐化学试剂
通用耐化学性
应用
包装
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.