Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RAVAMID® B GF40 BK - PA6-GF40 - Ravago Group

Material Data Center offers the following functions for RAVAMID® B GF40 BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ravamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
加工/物理特性价值单位Test Standard
ISO数据
模塑收缩率, 平行 0.2 % ISO 294-4, 2577
模塑收缩率, 垂直 0.8 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 8000 MPa ISO 527
断裂应力 140 MPa ISO 527
断裂伸长率 4 % ISO 527
弯曲模量, 23°C 7500 MPa ISO 178
简支梁冲击强度, +23°C 45 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 7 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C 8 kJ/m² ISO 180/1A
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 200 °C ISO 75-1/-2
维卡软化温度, B 210 °C ISO 306
1.5mm名义厚度时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 1.6 mm -
厚度为h时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 3.2 mm -
灼热丝燃烧指数 (GWFI) 650 °C IEC 60695-2-12
GWFI - 测试用试样厚度 2 mm -
其它性能价值单位Test Standard
吸湿性 0.15 % 类似ISO 62
密度 1450 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 75 °C -
预干燥-时间 3 - 4 h -
加工湿度 ≤0.12 % -
注塑熔体温度 240 - 270 °C -
模具温度 70 - 90 °C -
1区 220 - 230 °C -
2区 230 - 245 °C -
3区 250 - 260 °C -
喷嘴温度 250 - 260 °C -
螺杆转速 50 - 80 rpm -
背压 0.4 - 0.8 MPa -
保压压力 6 - 8 MPa -
典型数据
加工方法
注塑
供货形式
黑色
特殊性能
经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的
Certifications
回收树脂含量
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.