Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Repol C200MN - PP - Reliance Polymers

Material Data Center offers the following functions for Repol C200MN:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Repol datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 20 g/10min ASTM D 1238
温度 230 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ASTM数据
屈服应力 23 MPa ASTM D 638
屈服伸长率 4 % ASTM D 638
悬臂梁缺口冲击强度, 1/8 in 125 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
DTUL @ 66 psi 105 °C ASTM D 648
典型数据
加工方法
注塑
特殊性能
防静电的, 高冲击韧性的/经抗冲改性的
特征
有核的, 共聚物, 抗冲共聚物
Certifications
可食品接触的, FDA 21 CFR认证
应用
汽车
地区供应
欧洲, 亚太, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.