Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Solplast TH 30A9900 C - TPS - Uteksol d.o.o.

Material Data Center offers the following functions for Solplast TH 30A9900 C:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Solplast datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 2.8 g/10min ISO 1133
温度 190 °C -
负载 5 kg -
机械性能价值单位Test Standard
ISO数据
拉伸强度 5.5 MPa ISO 37
断裂伸长率 950 % ISO 37
23°C时恒定应变下的永久变形, 24h 10 % ISO 815
70°C时恒定应变下的永久变形, 24h 30 % ISO 815
100°C时恒定应变下的永久变形, 24h 56 % ISO 815
撕裂强度 16 kN/m ISO 34-1
肖氏硬度A 30 - ISO 7619-1
其它性能价值单位Test Standard
密度 1080 kg/m³ ISO 1183
典型数据
加工方法
其它挤出成型
特征
共聚物
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.