Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Starflam PZ0052E - PA6-GF - Eurostar Engineering Plastics

Material Data Center offers the following functions for Starflam PZ0052E:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Starflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ISO数据
拉伸模量 6100 MPa ISO 527
断裂应力 82 MPa ISO 527
断裂伸长率 2.5 % ISO 527
弯曲模量, 23°C 5200 MPa ISO 178
Izod冲击强度, +23°C 25 kJ/m² ISO 180/1U
悬臂梁缺口冲击强度, +23°C 3 kJ/m² ISO 180/1A
ASTM数据
拉伸模量 7440 MPa ASTM D 638
断裂拉伸强度 103 MPa ASTM D 638
断裂伸长率 2.3 % ASTM D 638
弯曲模量 7100 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 53 J/m ASTM D 256
Izod冲击强度, 1/8 in 469 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 137 °C ISO 75-1/-2
燃烧性－氧指数 20 % ISO 4589-1/-2
ASTM数据
UL94 燃烧性 V-2 - UL 94
测试厚度 0.75 mm -
热释放速率, 平行 32 E-6/K ASTM D 696
DTUL @ 66 psi 215 °C ASTM D 648
DTUL @ 264 psi 204 °C ASTM D 648
其它性能价值单位Test Standard
密度 1380 kg/m³ ISO 1183
吸水率, 24小时 1.05 % ASTM D 570
密度 1380 kg/m³ ASTM D 792
典型数据
加工方法
注塑, 其它挤出成型
供货形式
粒料
特殊性能
阻燃的
特征
少气味
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.